Skip to main content

Posts

Showing posts with the label icem

tidal turbine meshing

ICEM CFD Pointwise non-conformal mesh nodes distribution at interface # hard to get uni-form mesh at circumferential interface

ICEM

Import formatted point data File/import geometry/formatted point data  Typically in an ASCII file Specially formatted Can be extrapolated to 3D, with scaling, twist, etc. High or low curvature, etc. May require different blocking strategy(Topology) Requires some robust scripting Formatted point data File format, “.dat”[1] The data is read in as Bspline data The Formatted point data option converts formatted point data into the ANSYS ICEM CFD format. Each surface's data is represented in the following way: The first line contains two numbers, the number points for each curve, and the number of curves for each surfaces . The remaining lines represent the points of the surface. An example is shown below: ******* 62 4 0.0682618 9.731237 0.5112982 -0.2821764 19.30035 0.5278823 -1.046131 9.840971 1.598944 2D to 3D Blocks options - MultiZone Fill - Translate - Rotate       https://www.sharcnet.ca/Software/Ans...

File types in ICEM CFD

Project Settings (*.prj) An ICEM CFD project file contains the information necessary to manage the data files associated with your project. Tetin (*.tin) Contains geometry entities, material points, parts associations, and global and entity mesh sizes. Mesh (*.uns) Includes details of the line, shell, and volume mesh elements of the project. Shell meshes are composed of triangular and/or quadrilateral elements; volume meshes may include tetrahedra, hexahedra, pyramids, and/or prisms. Blocking (*.blk) Includes details of the underlying framework used to create a structured hexahedral mesh in your project. Blocking files can also be loaded from, or saved to, an unstructured mesh. Attributes (*.atr) or (*.fbc) Maintain the association of user-specified data for parts, element properties, loads, and constraints with the nodes/elements of the mesh for a project. Parameters (*.par) Contains mesh-independent data such as material properties, local coordinate systems, solver analysis setup, an...

mesh quality requirement

Fluent orthogonal quality minimum orthogonal quality>0.01 Aspect ratio: No specific value, avoid sudden and large changes in cell aspect ratios in areas where the flow field exhibit large changes or strong gradients Skewness <0.95   ANSYS Meshing For surface mesh , Min orthogonal quality 0.4-0.5 For volume mesh minimum orthogonality > 0.15 maximum skewness < 0.95 For orthogonal quality below 0.1, divergence is likely ICEM Pre-Mesh quality Determinant >0.3 Angle, (18, 90) Warpage < 45 degrees